Shaun Moulds
Member
- Dec 29, 2024
- 59
- 85
Is it normal that my cranks are tightening all the way down onto the circlip? I kinda just presumed they sat on the taper only. There was even a little bit of s
I'm trying to investigate a click from the non drive side of the bike now and noticed the circlip has spun at some point and dug into the inner crank surface, probably nothing/normal but new to me.
I'm trying to investigate a click from the non drive side of the bike now and noticed the circlip has spun at some point and dug into the inner crank surface, probably nothing/normal but new to me.
